Aloha Breeze ceiling fans can keep your home cool.
An ceiling fan is less expensive to run than an air conditioner so it helps to keep electrical costs down. Assembling an Aloha Breeze brand ceiling fan is like assembling almost any other type of ceiling fan.
Instructions
1. Screw the mounting bracket to the electrical box in the ceiling with a screwdriver.
2. Attach the motor assembly of the ceiling fan to the mounting bracket. Attach the small hook to the mounting bracket. This will hold the fan in place while you attach the wires.
3. Strip the ends of the new Aloha Breeze ceiling fan wires. Use wire strippers to remove ½ inch of the plastic sheath from the ends of the wires. Match the white wires from the ceiling and the fan. Twist together the ends of the wires and screw a wire nut over the top of the wire ends by hand. Repeat this with the black wires. Wrap the ground wire around the grounding screw in the ceiling electrical box.
4. Screw the canopy of the fan to the mounting bracket with a screwdriver. The model of Aloha Breeze fan will determine where these screws are located. In some cases, these screws are on the side, while in others the screws are on the bottom of the canopy.
5. Attach the blades to the blade brackets. Screw the blade brackets to the motor of the fan. Use a screwdriver to attach each bracket to the motor with two screws.
6. Use the attached screws to screw the glass light covers in place. Install light bulbs.
Tags: Aloha Breeze, mounting bracket, Aloha Breeze ceiling, Breeze ceiling, blade brackets