Quit using the fan remote and convert if to switch operation.
A remote control fan is both convenient and a novelty. It's convenient because you can lie in bed and change the fan speed or dim or turn off the lights without having to come out from under the covers. It's a novelty because not many fans are wired to be remotely controlled, but all fans can have a remote control added. Whatever reason your fan was remotely controlled, you can convert it to switch operation by simply removing the remote receiver.
Instructions
1. Turn off the breaker at the main electrical panel that supplies power to the ceiling fan.
2. Remove the hanging bracket canopy from the ceiling. This will give you access to the wiring and the remote control receiver.
3. Disconnect the remote receiver. The receiver will be either round or rectangular in shape with two wires connected to one end of the receiver and three wires connected to the other end. Remove the wire nuts that are connecting the wiring together by untwisting them all. Remove the receiver.
4. Wire the ceiling fan directly to the power-supply wires in the electrical ceiling fan box. Locate the white wire from the electrical box and the white wire form the ceiling fan. Use an orange wire nut to connect these two wires by twisting the wire nut onto the wires. Locate the black wire from the electrical box and connect it with the remaining two wires you removed from the receiver. One wire will be black and the other wire will be labeled as the lighting wire. Twist an orange wire nut to all three wires. Gently push all the wiring into the electrical box.
5. Replace the ceiling fan canopy onto the ceiling.
6. Turn on the breaker at the main electrical panel that supplies power to the ceiling fan.
Tags: remote control, breaker main, breaker main electrical, convert switch, convert switch operation, electrical panel, electrical panel that