Renovating your bathroom is one of the best home improvement projects you can undertake. While other home renovations will add beauty and charm to your home, renovating your bathroom with new ceiling tiles, new lighting and other improvements can actually increase the value of your home. But if you are planning to install ceiling tiles in your bathroom it is important to prepare the ceiling for the extra weight by first installing a quality cement fiber board.
Choosing the Right Cement Fiber
Before you can get started with the cement fiber installation, it is important to prepare carefully. The purpose of installing cement fiber on the ceiling of your bathroom is to enable that ceiling to withstand the additional weight of the ceiling tiles. Failing to prepare the ceiling for this extra weight could mean that your newly installed tiles will sag, or even come crashing down. When getting started, be sure to choose a high quality cement fiber board designed for use in the bathroom. Bathroom ceilings must withstand additional challenges, like moisture, so be sure you choose the highest quality cement fiber board you can afford.
Securing the Cement Fiber in Place
How you secure your cement fiber is very important. Nails should never be used for the installation of cement fiber board, as they can damage the structural integrity of the installation. Instead of using nails, secure the cement fiber board in place using bolts and screws. It is also very important that the cement fiber board be given as much support as possible, so be sure to use a stud finder to find the best places to anchor the cement fiber into place.
Take the Proper Safety Precautions
No matter where you are installing your cement fiber panels, it is important to follow the proper safety precautions. It is important to use a respirator when cutting the boards, especially if you will be using a power saw to cut small narrow strips. Most of the time you will be able to cut the by simply scoring each end with a special blade and then snapping the panels. Cutting cement fiber panels does require a special tool, so be sure to ask for it when you pick up your panels. If you need to cut small strips with a power saw, never do so inside, and be sure to wear a respirator even when cutting the panels outdoors. The dust these panels give off is fine enough to enter the lungs and cause silicosis, so always were your safety equipment when making cuts.
Tags: cement fiber board, fiber board, cement fiber, cement fiber, your bathroom, ceiling tiles, cement fiber panels