To install speakers into your walls or ceiling, you'll need to run the wires through the walls and mount the speakers to supports. Whether you choose to install your speakers in the walls or ceiling makes little difference in the sound quality.
Instructions
1. Locate the studs closest to where you'd like to install your speaker. You'll want to install the speakers in between the studs.
2. Tape the template that comes with the speakers in the center of the nearest studs. Check to make sure your configuration is level and plumb. Your template will tell you exactly what size hole to drill to insert the speakers. Trace the opening you need to cut into the wall or ceiling.
3. Cut the hole using a keyhole saw or a drywall saw. Keep the section you cut open in case you can't install the speaker and need to patch the hole you just made. If the hole reveals plumbing, you need to relocate the speaker.
4. Run the speaker wire through the wall, or fish speaker wire from an existing installation.
5. Install the brackets to support your speaker if one is included with your speakers. Some speakers use clips to secure them to the inside of the wall.
6. Strip the protective coating from the end of the speaker wire, and insert it into the speaker jacks. Test your speakers now if the wires are attached to an audio source. If not, locate the other end of the speaker wire and hook it up. Testing now will save trouble if you run into problems.
7. Surround the speaker with insulation to enhance the sound. Secure the speaker into place, and do any necessary patching or painting.
Tags: speaker wire, your speakers, install speakers, install your,
