At one time the only option available to have ceiling panels was to install grid work and use lay-in ceiling tile. There are many options available on the market now featuring easy to clean PVC tiles; some types of ceiling panels are paintable. Faux tin ceilings feature the look of the tin ceilings of yesteryear, and are easy to install, paint, and clean. Some ceiling panels will install directly onto a popcorn ceiling without the extra work of the removal of the popcorn or installing furring strips.
DIY Ceiling Panels over a Popcorn or Level Drywall Ceiling
Calculate the square footage of the ceiling by multiplying length times the width. Ceiling tiles are available in various sizes. Divide the square footage of the ceiling by the dimensions of the ceiling tile being used.
Remove any lights, fans, and vent covers from the ceiling in the room. Find the center of the room by measuring the length of the ceiling and making a mark at the center of the measurement. Do the same for the width. Pop a chalk line across the room from the center marks to find the center.
Use ceramic tile adhesive to place 9-to-12 dots on the back of each tile. Start the first tile in the center of the room at the point the chalk lines intersect. Press the tile firmly to the ceiling at each dot of adhesive to adhere it to the ceiling. Continue placing the tiles working from the center of the room outward. Trim the border tiles at the walls by measuring from the wall to the edge of the last tile placed. Measure on both ends, as most ceilings are not perfectly square. Trim the edge that will be nearest the wall. Cover the cut edge with ceiling trim. Cut the tiles face side down.
Apply a fine bead of caulking to all seams where the ceiling tiles meet. Install the ceiling trim, then replace light fixtures and vent covers.
Faux Tin Ceiling Panels
Faux ceiling panels are available in many sizes. They are made from extruded polystyrene and trimmed with a utility knife. The flanges of the tile overlap, eliminating seams that would require caulking. These tiles can be installed by gluing them to the ceiling or stapling to furring strips that are screwed into the ceiling joist.
Place furring strips according to the dimension of the ceiling tile used. Run them the opposite direction of the ceiling joist. This type of installation is recommended if the surface of the existing ceiling is not level or has been water damaged.
When using furring strips, begin installation in a corner and work outward.
Faux tin ceilings can be painted with metallic finishes by spraying or rolling on the tile either before or after installation.
Tags: furring strips, ceiling tile, center room, , ceiling panels, ceiling trim,