Wednesday, December 14, 2011

Repair Ceiling Drywall Cracks

Spackle








Drywall is an incredibly versatile construction material. Composed of gypsum and water pressed between sheets of heavy paper, this product is used to build walls, ceilings and other architectural features. While drywall is strong and durable, it can be subject to cracks or damage caused by sharp impacts or improper installation. The most common problem associated with this material is the appearance of hairline cracks in the surface. If you experience cracks in your ceilings, it is possible to repair them on your own, without hiring an expensive contractor. This project can be completed by the average homeowner in just a few hours.


Instructions


1. Use your hands or a screwdriver to pull away any loose drywall or debris from inside the crack. This will provide a solid base for your repair work.


2. Mix a joint compound (spackle) with water according to the manufacturer's instructions. Use a putty knife to fill the crack completely full of the spackle, then wipe away any excess material with your knife.


3. Place a piece of fiberglass mesh tape over the patched area, then apply a thin layer of spackle over the top, using your putty knife.








4. Wait 4 to 6 hours for the spackle to dry before proceeding.


5. Use a medium-grit sandpaper to hand-sand the patched area, including the tape and the spackle. Sand the patched area until it is smooth and level with the rest of the ceiling.


6. Paint the patched area using a bit of touch-up paint to complete the project.

Tags: patched area, putty knife