Ceiling hooks come in a wide range of sizes. The weight limit on the hook will be stated on the package of hooks. Choose the appropriate hook for the weight of the object you wish to hang from the ceiling. When installing a through drywall, make sure the hook you choose has at least 1 inch of threaded screw and 1 inch of shaft so the hook will not be too close to the ceiling. If not, the hook may not be usable since it will need to be in so far that the hook will rub the drywall after installation.
Instructions
1. Locate a stud, or solid 2-by-4, under the drywall by gently tapping the ceiling with a hammer and listening for the sound to change from a hollow, reverberating sound to a solid, no-echo sound. If possible, use a stud-finder to make this a little easier.
2. Mark the location for the ceiling hook with a pencil. Be sure to mark the area where you found the stud.
3. Hammer the 2-inch finishing nail where the hook will be screwed in to easily start the ceiling hook and reduce damage to the surrounding drywall. If you do not hit solid wood, use the hammer to gently tap the area until you locate the stud.
4. Remove the finishing nail by gently pulling out with the claw end of the hammer. Be sure to pull the finishing nail straight out to reduce damage to surrounding drywall.
5. Screw the ceiling hook into the hole made with the finishing nail. Be sure to keep the screw straight to prevent chipping of the drywall around the hook.
Tags: ceiling hook, finishing nail, hook will, damage surrounding, damage surrounding drywall