Thursday, September 8, 2011

Lengthen A Hanging Light Fixture







Most hanging lighting fixtures hang from either a chain or a hollow pole called a "downrod" that houses the fixture's wiring. Varying the length or height of a hanging light fixture can alter the apparent size of a room as well as its atmosphere. Chains and downrods come in numerous lengths and can be easily resized according to your needs.


Instructions


1. Decide the length at which you want your lighting fixture to hang. To determine how long your new hanging apparatus should be, measure from the point at which the current chain or downrod attaches to the ceiling mount to the point where you want the bottom of your fixture to reach and subtract the height of your lighting fixture.


2. Buy a chain or a downrod and cut it to the desired length. Purchase chains and downrods at any hardware store, and most stores will cut them for you. Purchase the same type of hanging material currently used by your fixture. If your fixture currently hangs by a chain, buy a chain of the same or greater thickness. If it hangs by a downrod, buy a downrod made of the same type of material. Keeping the materials consistent will ensure that your new hanger is strong enough to support the fixture.








3. Turn off the power to the lighting fixture by moving the circuit breaker for that room to the "off" position. Remove the lighting fixture from the chain or downrod and detach the chain or downrod from the ceiling mount. Connect the new hanging apparatus to the ceiling mount and attach the fixture to the apparatus. Restore the power to the room and test the fixture.

Tags: chain downrod, lighting fixture, ceiling mount, your fixture, hanging apparatus, same type, your lighting