Installing ceiling planks is a simple but tedious task that can place a great deal of strain on the neck and back. With the proper tools, material and instruction a clean looking job will be attainable. It is important that all wood used in the project is dry, free from defects and high quality.
Instructions
1. Locate all of the ceiling joists in the room with a stud finder. Snap the placement of the joists with chalk lines.
2. Install the furring beginning with the first strip along the edge of the wall perpendicular with the ceiling joists. Use two 8d nails at each joist to securely fix the furring to the joists.
3. Continue installing furring strips parallel to the next 12'' on center. Use a carpenter's level on each furring strip to ensure they're level.
4. Slide a shim piece between the ceiling and any uneven parts of the furring strips. Saw off the end of the strip with a hand saw.
5. Measure the length of the room and divide the length by 6", then add 6" to the remainder. Divide this sum by two and this will be the width the first row needs to be cut lengthwise. Cut the first row of planks to equal these measurements.
6. Nail the ceiling planks to the furring right hand corner of the room and work from right to left. Place nails in the flange of the planks where it crosses a furring and nail on the ends of the plank. Stagger each row of planks by 12" so the seams do not line up. It works best to begin each row with a plank that is 12" longer or shorter than the previous plank. Ensure that all planks begin and end on furring to add extra support and allow for nailing.
7. Nail the edge planks as close to the wall using 3d nails so that they will be covered by the molding. Cut out any openings in the ceiling for light fixtures.
8. Cut molding strips to equal the circumference of the room. Install molding around the edges of the ceiling ensuring to nail at least every 24 inches.
Tags: beginning with, ceiling joists, ceiling planks, furring beginning, furring beginning with