Acoustic ceilings, also called popcorn or stippled ceilings, are covered in white texturing that masks flaws and increases sound barriers. This texture was commonly found in homes in the 1970s and is still found in many homes. You can get this look by applying acoustic to your home. The task is messy, but it can be done in a day for a ceiling that won't need repainting. You'll need a hopper and compressor for the job, which you may rent a home supply store.
Instructions
1. Prepare the ceiling for the texture by filling holes with spackling using a putty knife. Allow the spackling to dry and sand it with 100-grit sandpaper. Dust the spackled areas with a tack cloth.
2. Coat the ceiling in a water-based ceiling primer. Use a roller sponge with an extendable handle and a small bristle paintbrush to cut the primer into the edges. Allow the primer to dry for at least four hours or according to the package instructions.
3. Cover the walls and flooring with plastic sheeting to keep it from becoming coated in the texture. The texture is quite messy to apply, so you will need to cover all the surfaces.
4. Mix the dry texture in a 5-gallon bucket with water as recommended on the package. The amount of water and texture will vary depending on the manufacturer. Stir thoroughly for a smooth texture. Allow it to set for 15 minutes.
5. Pour the texture into the hopper and turn the compressor on.
6. Spray the ceiling with a light coating of texture. Allow it to dry and then apply another layer. Apply three or four layers of texture, allowing each to dry before proceeding with the next. Heavy coats will give uneven texture and can start to drip off. The expand slightly as it dries, so it is better to examine it before each layer to see if you have sufficient coverage.
Tags: , texture Allow, texture will