Cutting evergreen plants into creative shapes is an ancient art practiced by first-century Romans. Arborvitae, an evergreen from the Cyprus family, grows as a cone-shaped tree or shrub. It thrives in colder climates, prefers moist, alkaline soils, and doesn't need a lot of care. It produces soft, scale-like leaves. A spiral topiary provides a good shape for the arborvitae, since a spiral works well with the plant's natural cone shape. A few simple steps can turn your arborvitae into an attractive spiral.
Instructions
1. Use pruning shears to trim the plant, smoothing out the natural cone shape.
2. Step back and look at your arborvitae from all angles to decide how steep you want the slope of the spiral.
3. Tie a ribbon to the tip of the plant.
4. Wind the ribbon around the plant, marking the slope you desire for the spiral, until you get to the bottom.
5. Step back and look at the arborvitae from all angles, checking that the loops of the ribbon are even and represent the spiral you want.
6. Starting about half-way down the tree, use the hedge clippers to trim above the ribbon, moving towards the top of the plant. Remove the last 1/3 of each branch above the ribbon, and step back every few branches to look at your work. Stop when you are about 1 foot from the top of the tree.
7. Go back to where you started cutting and begin cutting the branches below the ribbon on the top half of the tree. Again, remove the last 1/3 of each branch above the ribbon.
8. Step back and look at the plant. The ribbon on the bottom half should match the pattern of the spiral on the top half of the tree. Move the ribbon if necessary.
9. Prune the bottom half of the tree using the same process you used for the top half.
10. Start at the top of the tree. Use your hand to follow each cut branch back to where it joins the trunk, and use the hedge clippers to cut branches you want to remove about #189;-inch from the trunk. Check that you are cutting the larger branches you want to remove, not the smaller ones that make up your spiral.
11. Remove the ribbon.
12. Step back and look at the plant from all angles. Use the pruning shears to remove any uneven areas and more clearly define the spiral.
13. Use the pruning shears to trim the tip of the plant, blending it in with the top of the spiral.
Tips Warnings
Using a brightly colored ribbon that contrasts with the plant will make it easier to see the ribbon when you step back to check the spiral.
Arborvitae do not grow well in southern climates.
Related Posts:
Problems With Spiral Arborvitae Trees
An arborvitae is a tree that has leaves in the form of needles and is evergreen. You can cut an arborvitae tree into a spiral shape to get this unique design. However, a spiral arborvitae tree can...
Is It Hard To Maintain Spiral Pine Trees
The natural cone shape of many pine varieties makes them good choices for spirals.Keeping spiral conifer topiaries in shape isn't as hard as you think. After the shape is first defined, it's a sim...
Trim Cedar Trees
Cedar trees are coniferous evergreens that usually grow 100 to 130 feet tall. They are ornamental trees with needles organized into clusters and scented wood. A cedar tree does not need much pruni...
Care For A Pineapple Guava
The pineapple guava produces flowers with an unusual feature. You can pick the thick, fleshy flower petals right off the plant and eat them as a sweet, crispy treat. The fruit of the pineapple gua...
Use Carpet Tiles On Stairs
Use Carpet Tiles on StairsCarpeting on stairs provides you with more traction and comfort under the feet. For those who desire a do-it-yourself project and don't want to learn install carpet using...
