Pole buildings are large structures that are constructed of metal siding and roof panels connected to a frame. These structures are especially popular in the Midwest states. Pole buildings have two advantages over similar structures: they are economical and they can be erected quickly. One downfall of a pole building is, the metal can create moisture problems, especially when it comes to the roof.
Instructions
1. Choose a location that's higher than the area around it to build a pole building on. That way, precipitation will run away from the structure instead of into it. The land should also have good drainage to help keep rainwater and melted snow and ice from seeping inside.
2. Replace a dirt, gravel or limestone floor in a pole building with a cement floor. The cement will help keep the structure warmer and more watertight by preventing water seepage.
3. Reduce moisture on the underside of the roof on a pole building that's being built, you may consider using a membrane covering. Dripstop.net (see Resources) offers a product that is applied to the underside of a metal roof. It stops condensation from forming on the roof.
4. Check the soffits (underneath of the overhang of the roof) on the pole building to find out if they're vented. If they're not, add vents to them. Also, consider adding ridge vents to the roof if it doesn't already have them. Vents in the soffits allow air to enter. The air circulates, then escapes through the ridge vents. Proper air circulation, especially around the roof, will help keep hot and cold air from causing moisture.
5. Insulate the inside metal walls of the pole building. Insulation will help keep the heat and cold from getting in from the outside. It will also help reduce drafts and control condensation on the metal walls.
Tags: pole building, help keep, will help, will help keep, cold from, metal walls,